We have tested both the Beatbot AquaSense 2 Pro and the Clear UV in real pools, measured their suction at the intake, and lived with the filtration and daily routine each one requires. This comparison brings those results together so you can see the real-world trade-offs without relying on the numbers printed on either box.

This is also a corded-versus-cordless decision: one prioritizes continuous power and scheduling, while the other removes the cable but adds charging.

The short answer: Clear UV is our pick. At 2.09 PSI, it is the second-strongest robot in our canonical test data and adds UV-C treatment. Meanwhile, the Beatbot AquaSense 2 Pro carries a not recommended call in our review and is only relevant for Beatbot buyers who specifically want the dock and extra modes.

Quick Answer

Buy the Clear UV when its strengths match your pool. Best for: buyers who want elite suction plus the added UV-C feature. It is the stronger choice across the measurements and ownership factors that matter in our testing.

We recommend skipping the Beatbot AquaSense 2 Pro for most pools (it costs far more than the base aquasense 2 while testing slightly lower on suction.), unless your single overriding priority is Beatbot buyers who specifically want the dock and extra modes.

Our calls in the full reviews are Not recommended for the Beatbot AquaSense 2 Pro and Recommended for the Clear UV. Those calls matter here: PSI is the first round, not the entire verdict.

Beatbot AquaSense 2 Pro poolside during our reviewAquaSense 2 Pro · Cordless
Clear UV poolside during our reviewClear UV · Corded
Beatbot AquaSense 2 Pro and Clear UV side by side from our hands-on pool reviews.

Suction Power: 1.5 PSI vs 2.09 PSI

On our hydro manometer, the Beatbot AquaSense 2 Pro measured 1.5 PSI and the Clear UV measured 2.09 PSI. That gives the Clear UV a 0.59 PSI advantage, or about 39% more intake pressure than the lower reading.

We measure pressure directly at the intake with the same gauge and pool setup. That is different from manufacturer flow-rate claims in gallons per hour: GPH describes water movement, while PSI shows how hard the intake pulls on debris. Cordless results are recorded at full charge. Our complete pool-robot suction test explains the method and shows where both robots sit on the full board.

Beatbot AquaSense 2 Pro suction testing setupAquaSense 2 Pro · 1.5 PSI test
Clear UV suction testing setupClear UV · 2.09 PSI test
Beatbot AquaSense 2 Pro cleaning underwater on pool floorAquaSense 2 Pro · Floor pass
Clear UV cleaning underwater on pool floorClear UV · Floor pass
Manometer suction testing and underwater floor runs from our AquaSense 2 Pro and Clear UV test sessions.

The number needs context. It offers a polished dock, useful modes, and a respectable 1.5 PSI at full charge. At 2.09 PSI, it is the second-strongest robot in our canonical test data and adds UV-C treatment. The stronger gauge result gets this round, though intake pressure alone cannot make up for a filter that lets fine debris escape or a routine that makes you handle the robot every day.

Filtration and Debris Handling

The Beatbot AquaSense 2 Pro uses dual-layer flat mesh basket. The Clear UV uses high-surface-area ultrafilter rated around one micron.

We give the filtration edge to the Clear UV. Our comparison favors fine-particle capture, usable debris capacity, easy cleaning, and whether the better filter is included rather than sold as an upgrade.

For leaves, capacity and intake design matter. For pollen, silt, and the haze that dulls otherwise clear water, the filter media matters more. A basic mesh screen can look clean after a run while still passing the smallest material back into the pool.

Beatbot AquaSense 2 Pro filter media and debris captureAquaSense 2 Pro · Filtration
Clear UV filter media and debris captureClear UV · Filtration
Beatbot AquaSense 2 Pro daily handling and controlsAquaSense 2 Pro · Daily routine
Clear UV daily handling and controlsClear UV · Daily routine
Filter cleanouts, debris baskets, and day-to-day setup across our AquaSense 2 Pro and Clear UV testing.

Automation and Daily Work

The Beatbot AquaSense 2 Pro is cordless. App features and a wireless dock, but still needs daily retrieval and charging. The Clear UV is corded. App and power-supply controls with scheduled corded cleaning.

That power difference changes the ownership routine. The corded robot can keep full power through the cycle and run from a schedule when its controls support one. The cordless robot removes the floating cable, but it must come out of the water to recharge. For frequent cleaning, that usually means deploying and retrieving it every day.

The automation round goes to the Clear UV.

Coverage and Pool Fit

For the Beatbot AquaSense 2 Pro, our review found floor, walls, and expanded cordless cleaning modes. The Clear UV is built for floor, walls, and waterline, plus a built-in uv-c surface-treatment pass.

The Clear UV wins the coverage round on the breadth of surfaces and pool situations it can handle.

This is where the runner-up can still be the smarter fit for specific pools. A compact pool does not benefit from paying for reach it cannot use, while a pool with a sun shelf, long waterline, or heavy leaf load can expose the limits of a simpler machine quickly.

Beatbot AquaSense 2 Pro wall and surface coverage in poolAquaSense 2 Pro · Coverage
Clear UV wall and surface coverage in poolClear UV · Coverage
In-pool wall climbing, brush contact, and surface navigation during testing.

Value: Performance for the Money and Time

Our value take on the Beatbot AquaSense 2 Pro: A large price jump over the base model without stronger measured suction. For the Clear UV: Top-tier cleaning with UV as an extra feature rather than a substitute for suction.

The value edge goes to the Clear UV.

Value is not the same thing as the lowest checkout price. We count cleaning power, filtration, how many surfaces the robot covers, and how often you have to retrieve or charge it. A cheaper robot that leaves you vacuuming behind it is not a bargain, and an expensive robot only earns its price when its extra capability solves a real problem in your pool.

Which One Should You Buy?

  • Buy the Clear UV when its strengths fit your pool. Best for: buyers who want elite suction plus the added UV-C feature. At 2.09 PSI, it is the second-strongest robot in our canonical test data and adds UV-C treatment.
  • Skip the Beatbot AquaSense 2 Pro for most pools: Only consider it for Beatbot buyers who specifically want the dock and extra modes. It costs far more than the base AquaSense 2 while testing slightly lower on suction.
  • Know the main drawback: Clear UV — The UV lamp is a consumable and raises the price over the otherwise similar Clear S. Beatbot AquaSense 2 Pro — It costs far more than the base AquaSense 2 while testing slightly lower on suction.

Final Verdict

Clear UV wins this comparison. Clear UV wins the overall matchup. At 2.09 PSI, it is the second-strongest robot in our canonical test data and adds UV-C treatment. Beatbot AquaSense 2 Pro remains the better fit for Beatbot buyers who specifically want the dock and extra modes.

Read the complete Beatbot AquaSense 2 Pro review and Clear UV review for every test photo, setup detail, and long-form ownership note. You can also return to all pool-robot comparisons to see any other matchup from the 19 cleaners in our test set.